Industrial degreaser

For the gas, oil, and manufacturing industries

Industrial degreaser for the gas, oil and manufacturing industries

BMM A100 Degreaser is a 100 % Biodegradable specialty-cleaning product designed to remove carbon deposits, crude oil, resins and many other types of oils and greases. It is a water-based blend of vegetable emulsifiers, surfactants, and sequestering agents with a light smell. A100 Degreaser is a universal cleaner for heavy degreasing and contamination problems. A100 Degreaser has a double-action cleaning system:

  1. Softens and dissolves carbon deposits.
  2. Emulsifies dissolved oil and disperses or removes it by rinsing well with clean water. The resulting emulsion is stable yet can be precipitated out or separated to further reduce waste disposal.


  • Non-toxic
  • Non-flammable
  • Non-hazardous – Not subject to dangerous goods regulations
  • No phosphates, acids, or silicones
  • Fully biodegradability
  • Fresh smell
  • Safe to use on all metals, plastics, lacquer paints, floors, walls, ceilings, etc.


A100 Degreaser is a highly effective agent for cleaning storage tanks, tank walls, tank trucks, heat exchangers, pipelines, floors, equipment, vehicles, and machinery. Cleaning applications include hydrocarbon residues, tar-like deposits, oils, and grease.

Directions for use

Depending upon the type and thickness of the contamination, the general cleaning time will be between 5 - 60 minutes. After cleaning, simply rinse with water. Due to the exceptional cleaning capability of A100 Degreaser it can be safely used on most metals and structural materials. Some examples are below:

Method: Immersion system

Dilution: Full strength or 1:1 with water

    1. Place item to be cleaned in immersion system containing A100 Degreaser.
    2. Allow to soak. Soaking time will depend on type and thickness of the contamination but may range from 10-60 minutes.
    3. Agitation may reduce soaking time, as may heating the A100 Degreaser to 60C maximum.
    4. Rinse with clean water.
    5. Dry.
    6. Repeat if necessary.

Method: Manual Application & Low Pressure Cleaning

Dilution: Full strength or 1:1 with water

    1. Spray A100 Degreaser on surface to be cleaned.
    2. Scrub surface with brush.
    3. Rinse with clean water.
    4. Repeat if necessary.
    5. Dry.

Method: High Pressure Cleaning

Dilution: 1:50 to 1:100 with water

    1. Dilute A100 Degreaser or adjust sprayer pickup depending on the level of contamination.
    2. Spray A100 Degreaser on surface to be cleaned.
    3. Rinse with clean water.
    4. Repeat if necessary.
    5. Dry.

Supplied in 25 / 210 and 1000 litres IBC.